DO IT
YOURSELF
Estimated completion time: 2 to 4 days
Difficulty level: Beginner
Repairability level: Maximum
What is the biggest advantage of creating it yourself? In 10 years your game will still work because you will be able to repair it very easily and cheaply, here is an example: if tomorrow a Joystick no longer works, you can replace it yourself in 2 minutes and it will only cost you $3.
Explanations step by step of the creation, assembly
Already made circuits boards for game and gamepads
Get all the programing code files, well commented
Request help anytime thanks to the support ticket system
Access the affiliate program and earn 3$ for each affiliate
INTRODUCTION
3 years of work have made it possible to offer a very high quality and simplified tutorial to allow anyone to create their own game.
Hyperlaps© Initial was created by hand in an artisanal way by an individual and during this tutorial, you will be advised the same parts, the same materials and tools which were used to create the game which you can see in the gameplay video of the home page.
These will only be proposals for recreating this game identically but you are free to change the materials or parts if you think they are more suitable for your personal creation.Your game is unique, let’s start it together!
SUMMARY OF REQUIRED COMPONENTS
If any links are not valid for your delivery country, open a support ticket and we will find similar components for your country. Some links are not listed in this public version of the tutorial.
- Pencil
- Ruler
- Drill
- Wood glue
- Wood screws
- Flat washers x 8
- Flat screwdriver
- Saw
- Wooden panel 700x700x10mm
- Pieces of Wood: 170x34x61mm (4pcs)
- Pieces of Wood: 136x34x61mm (4pcs)
- Pieces of Synthetic Glass: 379x55x4mm (4pcs)
- M3 T-nuts (50pcs)
- GT2 pulley (16 teeth, bore 5mm, Belt width 6mm (16TB5W6)) x 4
- Limit switch (10pcs, Right Type)
- Threadlocker
- Solenoid JF-0520B, 12V x 4
- 2020 Rolling Tray x 4 (Type A)
- Self-locking tie (3x60mm)
- Power Button - 16mm (1pcs) - 24v - Latching fixation
- DC Connector 5.5x2.5mm (1pcs)
- PSP 3000 (For PSP 3000) Joystick (4pcs)
- 10 Segment Led Bargraph (4pcs)
1. BASE SUPPORT
The base support is a wooden panel with the following dimensions: Length (in mm), 700. Width (in mm), 700. Thickness (in mm), 10.
Once you have the base support at the right size, we will cut out the four corners, this has no particular use but will give your Hyperlaps© a modern design.
Start from one edge of the board and draw a line 60mm away from the edge, along the entire 700mm length of the board. Do the same thing on all sides, you just have to connect the points diagonally and cut each corner.
AFFILIATE PROGRAM
Become a referral partner and earn 3$ for each affiliate!
NEED HELP?
Request help anytime thanks to the support ticket system.